Engineered to control particle generation and grease scatter in precision linear guides, ball screws, and cleanroom automation equipment. Evaluate TRG FN IV for your contamination-sensitive applications.
Low dust grease is a specialized industrial lubricant selected for mechanical systems where controlling airborne particle contamination is critical. In linear guides and ball screws, grease provides an essential lubricating film through its base oil, but dynamic motion, sealing structures, and grease filling quantities can lead to grease scatter or particle emissions.
It is important to understand that "low dust" does not mean zero particles, nor does it automatically equal "low outgassing" for vacuum environments.
A properly formulated low dust grease, such as TRG FN IV, is designed to minimize particle generation during continuous mechanical operation while maintaining the necessary load-carrying and anti-wear properties required for precision motion systems.
Understanding the source of contamination is the first step in selecting the right cleanroom lubricant. Not all particles originate from the grease formulation itself.
Shearing forces during the rolling contact of balls or rollers can cause the thickener structure to break down, releasing microscopic oil droplets or particles into the surrounding air.
Excessive grease filling quantities or high-speed operation can cause macroscopic grease droplets to physically scatter onto nearby sensitive optical or electronic surfaces.
Friction between rolling elements, raceways, and carriage components generates metallic or plastic wear debris, which must be distinguished from grease-generated particles.
Improper cleaning, compromised carriage seals, environmental dust, or contamination introduced during the machine assembly process can elevate particle counts independently of the grease.
Linear guide carriages in continuous, high-frequency motion place severe demands on particle control. Selecting a specialized thickener system helps mitigate airborne emissions during repeated strokes.
In precision electronics or optical inspection equipment, visible grease splatter is unacceptable. Appropriate base oil viscosity and controlled filling procedures are necessary to prevent migration.
Cleanroom environments still require precise positioning. Viscous resistance from the grease can affect carriage preload and motor feedback, necessitating a balance between cleanliness and friction.
Short, repetitive movements can prevent proper lubricant redistribution, leading to localized metal-to-metal contact and fretting wear, which generates secondary mechanical particles.
Applying low dust grease over incompatible factory anti-rust oils or general-purpose lithium greases can destroy the cleanroom performance. Proper washing protocols are often required.
Manual relubrication inside a cleanroom poses a risk of introducing external dust or over-packing the carriage, which immediately spikes particle generation upon machine restart.
Formulated with a synthetic base oil and an advanced urea thickener, TRG FN IV is engineered for cleanroom linear guides and precision ball screws. It serves as a primary candidate for procurement teams evaluating low-particle lubrication solutions.
*Note: While a 0.1% oil separation rate indicates high structural stability, actual cleanroom suitability must be verified against specific equipment particle limits and operational conditions.
While FN IV prioritizes particle control, FN V is designed for equipment requiring both low dust characteristics and stable rolling resistance during precision micro-motion.
| Technical Property | TRG FN IV | TRG FN V |
|---|---|---|
| Main Application Focus | Primary low dust cleanroom environments | Low dust + Precision micro-stroke motion |
| Base Oil Type | Synthetic Oil | Synthetic Oil |
| Thickener | Urea | Lithium |
| Base Oil Viscosity at 40°C | 99 mm²/s | 100 mm²/s |
| Worked Penetration | 280 | 315 |
| Oil Separation (100°C / 24h) | 0.1% | 2.6% |
| Dropping Point | 260°C | 220°C |
Particle generation cannot be determined by grease formulation alone. Meaningful data requires testing under defined mechanical conditions. A grease that performs well in a specific linear guide test may yield different results under higher speeds or larger fill volumes.
Without identical parameters (e.g., air flow rate, stroke length, particle size threshold), direct comparison of particle counts between different manufacturer data sheets is scientifically invalid.
A common engineering mistake is assuming these terms are interchangeable. Selecting the wrong category can lead to catastrophic contamination or lubrication failure.
Focuses on controlling physical particle emissions generated during mechanical movement in atmospheric cleanrooms. Evaluated by airborne particle counts. (e.g., TRG FN IV)
Focuses on minimizing the release of volatile condensable materials (VCM) when subjected to heat or specific environmental conditions. Often evaluated via ASTM E595 (TML/CVCM).
Engineered to maintain lubrication integrity and extremely low vapor pressure in high-vacuum environments without evaporating. Low dust grease cannot automatically be used as vacuum grease.
True cleanroom compliance depends on the synergy between the lubricant, the mechanical components, and the operational parameters. Consider these factors before procurement:
| Application Requirement | Main Engineering Concern | TRG Grade |
|---|---|---|
| Cleanroom Linear Guides | Particle contamination & grease scatter | FN IV |
| Cleanroom Ball Screws | Lubrication film and particle control | FN IV *Subject to review |
| Precision Micro-Stroke | Rolling resistance & low dust requirements | FN V |
| Short-Stroke Fretting | Localized fretting wear | FN III *If clean criteria met |
| Property | TRG FN IV | TRG FN V |
|---|---|---|
| Base Oil | Synthetic Oil | Synthetic Oil |
| Thickener | Urea | Lithium |
| Base Oil Viscosity (40°C) | 99 mm²/s | 100 mm²/s |
| Worked Penetration (25°C / 60 Strokes) | 280 | 315 |
| Dropping Point | 260°C | 220°C |
| Oil Separation (100°C / 24h) | 0.1% | 2.6% |
| Four-Ball Weld Load | 1,236 N | 1,236 N |
| Catalog Operating Temperature | −40 to +180°C | −40 to +120°C |
| Packaging | 70g / 400g | 70g / 400g |
Influences the lubrication film thickness and running resistance. Similar viscosities (99 vs 100) do not guarantee identical friction due to different thickener structures.
Measures base oil release under static heat. While lower separation (0.1%) indicates stability, it is distinct from dynamic particle emission rates.
Indicates grease consistency. Affects how the grease fills the carriage, how it is retained, and its flow characteristics during initial operation.
Catalog temperature ranges and standard properties do not replace the need for independent particle testing under specific cleanroom equipment conditions.
Precision guides and positioning stages where airborne particle contamination strictly dictates yield rates. Requires rigorous validation of grease emission profiles.
Handling modules and XYZ platforms operating in ISO-rated environments. Grease scatter must be controlled to prevent contamination of transferred substrates.
Linear motion mechanisms inside processing chambers or transfer lines. Requires low particle generation combined with adequate load-carrying capacity.
High-speed, repetitive pick-and-place mechanisms where standard lithium greases may generate excessive airborne dust affecting component placement.
Stages operating adjacent to sensitive lenses and sensors. Grease scatter and volatile migration must be entirely mitigated to prevent optical degradation.
Robotic sample handling where biological or chemical contamination from mechanical lubricants is strictly prohibited. Requires verifiable low-emission grease.
Ideal for standard enclosed machinery where airborne particles are not a primary concern. Prioritizes load capacity, water resistance, or cost-efficiency.
Selected when contamination risks justify a specialized formulation. Essential near optical surfaces, semiconductor wafers, or inside cleanroom automation.
In precision positioning equipment, achieving low particle counts is only half the engineering challenge. For devices operating with micro-strokes, low-speed travel, or repetitive short-distance positioning, the viscous resistance of the grease can cause fluctuations in rolling resistance.
TRG FN IV is designed to address this dual requirement. While it controls dust generation for clean environments, its formulation focuses on maintaining stable carriage movement, minimizing resistance fluctuations that could otherwise impact motor feedback and positioning accuracy.
*Note: Final positioning accuracy is a system-level metric depending on guide rail rigidity, encoder resolution, and controller tuning, not solely on the grease selection.
Identify existing factory anti-rust oils or incompatible greases currently in the system.
Follow OEM guidelines to wash away old residues. Unverified mixing can destroy cleanroom performance.
Use dedicated, clean grease guns or nozzles to prevent introducing external particles.
Inject only the specified volume. Over-packing increases grease scatter and initial particle spikes.
Run the carriage back and forth. Wipe away any excess expelled grease before cleanroom operation.
For industrial buyers seeking alternative low dust lubrication solutions, TRG offers products with aligned application focuses. The following references are provided for evaluation purposes.
| Existing Grease Reference | TRG Product for Evaluation |
|---|---|
| THK AFE-CA | TRG FN IV |
| THK AFF | TRG FN V |
These are application-based references, not unconditional drop-in replacements. Buyers must independently verify:
Clear specifications on base oil, thickener, viscosity, and oil separation to support your initial engineering evaluation.
Submit your guide model, speed, and contamination limits for tailored grease selection support.
Standardized 70g and 400g packaging with clear product identification to prevent maintenance mix-ups.
Inquire about TDS, SDS, and available particle test information to support your internal quality approval process.
Available in standard bellows cartridges designed for cleanroom maintenance and precision motion system integration.
Ideal for miniature linear guides, small ball screws, and manual cleanroom relubrication tasks.
Standard size for equipment assembly lines and larger cleanroom automation systems.
Ask about sample availability for engineering validation and compatibility testing.
Contact us to confirm MOQ, lead times, and distributor purchasing policies.
Review common engineering and procurement questions regarding low dust grease selection for cleanroom applications.
General and special-purpose lubrication selection for linear motion systems.
Lubricants optimized for load, speed, torque, and temperature rise in ball screws.
Solutions for short-stroke oscillation and micro-vibration wear protection.
Formulated for low starting torque and high-speed long-stroke applications.
Submit your mechanical specifications and contamination limits. Our engineering team will review your requirements to recommend the appropriate TRG FN series grease or discuss sample availability.
support@trglube.com